Home > Devices >

asMODus Spruzza 80W Squonk Kit
asMODus Spruzza 80W Squonk Kit

Alternative Views:

Original Price: (Members Only)


Click to view another Color




asMODus has only been releasing amazing mods as of late, and the Spruzza is no different. With it's compact form factor, bottom feed capability, and beautiful aesthetics, the Spruzza is sure to find its way into the hearts of squonking fans everywhere. Instead of squeezing on a bottle like most squonking mods require, juice is fed using what asMODus has billed as the Smart Siphon System (SSS). The SSS is a simple pump mechanism that is operated via the small lever located on the side of the device, and is primed with VG from the factory to ensure the smoothest operation possible. Cleaning the SSS is simple, with no disassembly required. All the user needs to do is flush the pump with VG, working it through by operating the pump to flush any old juice out of the system. Both of the Spruzza's side panels are removable, with one covering the SSS, and the other concealing the battery tray. Firing modes supported by the GX-80-HUT chipset present in the Spruzza include standard variable wattage, wattage curve, and temperature control presets for Ni200, titanium, SS316, SS317, and SS304 wire as well as TCR and TFR modes. Switching between firing modes is done by unlocking the screen and simply swiping left or right to cycle through the options, reducing the time it takes to get your setup functioning just the way you like it. When it comes to unlocking the device, asMODus have kept their classic swiping method as default while also providing the option to tap the screen three times to unlock the screen.

Included with the Spruzza is one of asMODus' squonk focused RDAs, either the Fonte or the Oni-1.

Intended to generate amazing flavor, the Fonte features a simple two post deck with side mounted hex screws used to retain the leads as well as a convex juice well that ensures juice runs to the exterior walls, where it is guaranteed to come into contact with the wicks. The dual side airflow is fully adjustable, and can accommodate either single or dual coil builds. Each airflow inlet is machined at a downward angle, directing the incoming air towards the bottom of the coils, providing a bottom airflow effect to boost the flavor production, which is also enhanced by the conical top cap and tapered drip tip, which concentrates the vapor formed in the chamber,. A heat sink is built into the top of the atomizer to help absorb and dissipate excess heat, keeping the Fonte at a comfortable temperature no matter how often you hit it.

The latest version of the Spruzza includes the new Oni-1 single coil RDA, a dripping atomizer that is designed in the same vein as the Zesthia, with two large posts located on opposite sides of the deck. Each post has two terminal slots, and are fashioned so that the coil sits comfortably between them, with plenty of space to ensure that the heating element does not short out against either of the posts. Airflow enters the Oni-1 through two adjustable slots that are machined into the deck at an upward angle, providing the best of both a bottom and a side airflow design by directing incoming air along the bottom of the coil to ensure optimal flavor and vapor production. A conical 810 Delrin drip tip helps to condense the vapor produced in the chamber, and a ridged Delrin ring integrated into the top cap functions as an extra buffer to help insulate the atomizer as well as helping to prevent any spitback from entering the user's mouth. When equipped with the pre-installed squonk pin, juice is fed through the base of the atomizer and split into two distinct holes which divides the juice evenly throughout the deep juice well, encouraging even wicking that prevents dry hits.
The seafoam green o-rings that surround the base of the deck are manufactured with a material specifically chosen for its resistance to swelling, tearing, and temperature, thoughtfully chosen so that the Oni-1 will remain in perfect operating condition far longer than your average RDA.

asMODus Spruzza Features

  • Powered by a single high-drain 18650 Li-ion battery
  • GX-80-HUT chipset
  • Wattage range: 5-80W
  • Temperature control range: 212-572F/100-300C
  • Maximum voltage output: 7.5V
  • Maximum current: 35A
  • Minimum atomizer resistance: 0.1 ohm
  • VW and wattage curve mode
  • Temperature control support for Ni200, titanium, SS316, SS317, and SS304 wire
  • TCR and TFR modes
  • Stabilized wood side panels
  • Capacitive touch screen
  • Touch and swipe technology
  • Smart Siphon System
  • Easy to clean, no disassembly required
  • Reverse polarity, short-circuit, overcharge and low-voltage protection
  • Firmware upgrades available
  • Micro USB firmware upgrade and charging port
  • Locking screen
  • Spring-loaded 510 connection

asMODus Fonte RDA
  • 24mm diameter
  • Two post deck
  • Side-mounted hex screws
  • Convex juice well that aids wicking
  • Flavor enhancing conical top cap and drip tip
  • Dual adjustable directional side airflow
  • Single and dual coil compatible
  • Pre-installed squonk pin
  • Top-mounted heat sink
  • 510 connection

asMODus Oni-1 RDA
  • 24mm diameter
  • Two post four terminal build deck
  • Intended for use with single coil builds
  • Deep juice well
  • Angled adjustable dual side airflow
  • Delrin insulator ring built into top cap
  • Squonk compatible
  • Juice splitting base
  • Flavor enhancing conical top cap
  • Flavor boosting 810 Delrin drip tip
  • 510 connection

Kit Includes:
  • 1x asMODus Spruzza 80W Mod
  • 1x asMODus Fonte Squonk RDA or asMODus Oni-1 RDA
  • 1x Spare gaskets and o-rings
  • 1x Chamber reducer (Included with the Fonte only)
  • 2x Allen key
  • 2x Fused Clapton coils
  • 1x User manual
  • 1x Warranty card


Related Products
AsMODus Pumper 20/21 Squonker Box Mod AsMODus Pumper-18 Squonker Box Mod Oni Edition BF Squonk 80W Kit (PRE-ORDER) Ultroner x Asmodus Luna Squonker Box Mod

Original Price: (Members Only)

Original Price: (Members Only)

Original Price: (Members Only)

Original Price: (Members Only)
AsMODus Pumper-21 Squonker Box Mod AsMODus Pumper-18 Squonker Box Mod Oni Edition BF Squonk 80W Kit (PRE-ORDER) Ultroner Luna x Asmodus Squonker Box Mod | Single 18650 Unregulated device with protections
asMODus Spruzza Replacement Door Spruzza Smart Siphon Glass Replacement (Pack of 3) Asmodus Spruzza Smart Siphon Box asMODus Spruzza 80W Squonk Kit (Mosaic Edition)

Original Price: (Members Only)

Original Price: (Members Only)

Original Price: (Members Only)

Original Price: (Members Only)
asMODus Spruzza Replacement Door Spruzza Smart Siphon Box Glass Replacement Asmodus Spruzza Smart Siphon Box asMODus Spruzza 80W Squonk Kit (Mosaic Edition)