Another standout flavor-focused single coil rebuildable dripping atomizer from the team at asMODus, the .Blank BF RDA is a excellent example of the impact that incremental improvements can have on a piece of vaping hardware. Providing some of the best performance we've seen out of a top-airflow atty, the .Blank utilizes a build deck similar to both the Bunker and C4 RDAs, with two large posts located on either side allowing for precise building. Two hex grub screws act as a reliable retention method, and the curved design of the posts allow for the leads to be trimmed after installation. These large posts act as chamber reducers, helping to condense the vapor to provide a more rich, pronounced flavor. Much like previous asMODus rebuildable dripping atomizers, the floor of the deep juice well takes a concave shape, helping to funnel any excess juice towards the wicks for later use.
While the .Blank might at first seem like another BF RDA, the unique airflow design completely changes that. The intake is composed of six separate airflow slots positioned near the top of the outer barrel, and can be adjusted by simply rotating the barrel once the top cap is firmly mounted on the deck. These inlets are designed to reduce turbulence as well as leakage, and feed incoming air down through the hollow posts before it curves inwards towards the bottom of the coil for excellent vapor and flavor production. The inner airflow disk is composed of PEEK, chosen for its heat resistance as well as non-conductive properties, the perfect material for this application. Two locking notches along the top disk mesh together with protrusions milled into the top of each post, allowing for precise fine tuning as well as easy removal even with seized threads. The ceiling of the top cap is fairly low profile, increasing flavor production even further.Topping off this beast of a bottom feed atomizer is a tapered wide bore 810 Delrin drip tip which helps to create the dense, rich vapor this awesome piece of vaping hardware provides.
An excellent addition to any vaper's arsenal of atomizers, the asMODus .Blank BF RDA is sure to hit you hard, with a unique leak-resistant airflow control method helping to reduce the mess associated with squonking, and the flavor-oriented design producing a vaping experience that can only be compared to be hit with a round from point blank range.
- 24mm diameter
- High-quality stainless steel construction
- Compatible with single coil builds
- Fully adjustable sextuple top airflow inlets
- Turbulence reducing and leak resistant airflow slots
- Chamber reducing dual post design
- Low profile chamber ceiling
- Integrated locking notches
- Deep, concave juice well
- Hex grub screw wire retention mechanism
- PEEK insulator and airflow control disc
- Tapered 810 wide bore Delrin drip tip
- Silver plated standard and BF compatible squonk 510 pins
- 510 connection
- 1x asMODus .Blank 24mm BF RDA
- 1x BF squonker 510 pin (pre-installed)
- 1x Standard 510 pin
- 2x Oni 0.2Ω triple fused Clapton coils
- 2x Allen key
- 1x Spare parts bag
- 1x User manual